LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> XL-7 EX, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> 5A/T >> Diagnostic Information and Procedures >> DTC Clearance >> DTC Clearance Using Monitor Connector
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Clearance Using Monitor Connector

  1. Remove steering column hole cover (1).
  2. Turn ignition switch ON.
  3. After 6 seconds or more, repeat connecting and disconnecting diagnosis switch terminal (3) and ground terminal (4) of monitor connector (2) 5 times at about 1 second interval within 10 seconds, using service wire.
  4. Check TCM that no malfunction DTC remains in memory of it.
Fig 1: Disconnecting Diagnosis Switch Terminal And Ground Terminal Of Monitor Connector
G04099794Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals