Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kg-m | lb-ft | |
| Transmission case plug | 7.5 | 0.75 | 5.5 |
| A/T fluid drain plug | 20 | 2.0 | 14.5 |
| Manual selector assembly bolt | 18 | 1.8 | 13.0 |
| Manual selector assembly mounting bolts | 18 | 1.8 | 13.5 |
| Manual select lever nut | 13 | 1.3 | 9.5 |
| Manual select lever nut (select cable side) | 23 | 2.3 | 16.5 |
| Manual shift lever nut | 19 | 1.9 | 14.0 |
| Oil cooler pipe union bolt (In case copper base alloy gaskets (bronze in color) are used) | 35 | 3.5 | 25.5 |
| Oil cooler pipe union bolt (In case rubber coated steel gasket (black in color) are used) | 25 | 2.5 | 18.0 |
| Extension case bolt | 35 | 3.5 | 25.5 |
| Transfer oil drain plug and level / filler plug | 23 | 2.3 | 17.0 |
| Transmission case right stiffener bolt | 50 | 5.0 | 36.5 |
| Torque converter mounting bolt | 65 | 6.5 | 47.0 |
| Transmission to engine bolt and nut | 85 | 8.5 | 61.5 |
| Flywheel bolt | 78 | 7.8 | 56.5 |
| Engine rear mounting bolt | 50 | 5.0 | 36.5 |
| Engine rear mounting member bolt | 50 | 5.0 | 36.5 |
| Exhaust No.1 pipe to manifold bolt and nut | 50 | 5.0 | 36.5 |
| Muffler to exhaust No.2 pipe nut | 60 | 6.0 | 43.5 |
| Universal joint flange bolt and nut | 50 | 5.0 | 36.5 |
| Oil filler tube bolt | 23 | 2.3 | 17.0 |
| Select cable bracket bolt | 23 | 2.3 | 17.0 |
| Oil pump bolt | 7.5 | 0.75 | 5.5 |
| Upper valve body bolt | 5.5 | 0.55 | 4.0 |
| Lower valve body bolt | 5.5 | 0.55 | 4.0 |
| Detent spring bolt | 5.5 | 0.55 | 4.0 |
| Throttle cam bolt | 7.5 | 0.75 | 5.5 |
| Pressure relief valve bolt | 5.5 | 0.55 | 4.0 |
| Plate bolt | 5.5 | 0.55 | 4.0 |
| Shift solenoid valve bolt | 10 | 1.0 | 7.5 |
| TCC solenoid valve bolt | 5.5 | 0.55 | 4.0 |
| Lower valve body and TCC control valve Plate bolts | 5.5 | 0.55 | 4.0 |
| Center support bolt | 26 | 2.6 | 19.0 |
| Torque converter housing bolt | 35 | 3.5 | 25.5 |
| Torque converter housing bolt | 58 | 5.8 | 42.0 |
| Oil pump bolt | 22 | 2.2 | 16.0 |
| Pawl bracket screw | 7.5 | 0.75 | 5.5 |
| Valve body bolt | 10 | 1.0 | 7.5 |
| Oil screen bolt | 5.5 | 0.55 | 4.0 |
| Brake applying cover bolt | 10 | 1.0 | 7.5 |
| Transmission oil pan bolt | 4.5 | 0.45 | 3.5 |
| Adapter case bolt | 42 | 4.2 | 30.0 |
| Manual shift shaft set nut | 4 | 0.4 | 3.0 |
| Shift switch lock bolt | 5.5 | 0.55 | 4.0 |
NOTE:
The specified tightening torque is also described in the following.
"MANUAL SELECTOR ASSEMBLY COMPONENTS "
"MANUAL SELECTOR ASSEMBLY COMPONENTS "
Reference:
For the tightening torque of fastener not specified in this article, refer to "FASTENER INFORMATION ".