Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N.m | kg-m | lb-ft | ||
| P/S belt tension pulley bolt | 25 | 2.5 | 18.5 | |
| Tie-rod end nut | 48 | 4.8 | 35.0 | |
| Wheel nut | 100 | 10.0 | 72.0 | |
| Tie-rod end lock nut | 65 | 6.5 | 47.0 | |
| Steering lower shaft bolt | 25 | 2.5 | 18.5 | |
| Gear box high pressure pipe union bolt | 35 | 3.5 | 25.5 | / |
| Gear box cylinder pipe flare nut | 25 | 2.5 | 18.0 | |
| Gear box mounting bolt | 55 | 5.5 | 40.0 | |
| Gear box low pressure pipe union bolt | 40 | 4.0 | 29.0 | / |
| Tie-rod ball nut | 90 | 9.0 | 65.0 | |
| Pump union bolt | 60 | 6.0 | 43.5 | |
| Pipe clamp bolt / reservoir bracket bolt | 11 | 1.1 | 8.0 | |
| Pump bracket bolt | 45 | 4.5 | 33.0 | |
| Pump mounting bolt | 45 | 4.5 | 33.0 | |
| Tension pulley bolt | 25 | 2.5 | 18.5 | |
| P/S pump cover bolt | 23 | 2.3 | 17.0 | |
| Pressure switch | 28 | 2.8 | 20.5 | |
| Plug | 60 | 6.0 | 43.5 | |
| Suction connector bolt | 10 | 1.0 | 7.5 | |
Reference:
For the tightening torque of fastener not specified in this section, refer to "FASTENER INFORMATION : ".