Passenger Air Bag (Inflator) Module Removal and Installation: Installation

Install passenger air bag (inflator) module (1) to vehicle.
Tighten passenger air bag (inflator) module attaching bolts to specified torque.
Tightening torque

Passenger air bag (inflator) module bolt: 23 N.m (2.3 kg-m, 17.0 lb-ft)
Install glove box (3) to instrument panel (2) and then connect glove box damper to glove box.

Fig 1: Installing Passenger Air Bag (Inflator) Module
Courtesy of SUZUKI OF AMERICA CORP.
Connect negative battery cable to battery.
Enable air bag system. Refer to "ENABLING AIR BAG SYSTEM ".