LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> XL-7 EX, 4WD >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance And Lubrication >> Repair Instructions >> Ignition Coil (Plug Cap) Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil (Plug Cap) Inspection

  1. Remove ignition coil assemblies referring to "IGNITION COIL ASSEMBLY (IGNITER AND IGNITION COIL) REMOVAL AND INSTALLATION : ".
  2. Check ignition coil assembly for damage, deterioration and terminal corrosion.

    If defective condition is found, replace.

    Fig 1: Checking Ignition Coil Assembly For Damage, Deterioration And Terminal Corrosion
    G04097296Courtesy of SUZUKI OF AMERICA CORP.
  3. Install ignition coil assemblies referring to "IGNITION COIL ASSEMBLY (IGNITER AND IGNITION COIL) REMOVAL AND INSTALLATION : ".
scientia non olet · About LEMON Manuals