DTC Troubleshooting
DTC TROUBLESHOOTING CHART
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Was "Engine and Emission Control System Check" performed? | Go to Step 2. | Go to "ENGINE AND EMISSION CONTROL SYSTEM CHECK ". |
| 2 | Engine start signal check
Is voltage 0-1 V? |
Go to Step 3. | "BLK/YEL" wire shorted to power circuit. |
| 3 | Engine start signal check
Is voltage 6-14 V? |
Intermittent trouble. If OK, substitute a known-good ECM (PCM) and recheck. | "BLK/YEL" wire open. If OK, substitute a known-good ECM (PCM) and recheck. |