Tightening torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kg-m | lb-ft | |
| Differential oil level/filler plug | 40 | 4.0 | 29.0 |
| Differential oil drain plug | 25 | 2.5 | 18.0 |
| Air pump assembly mounting bolt | 13 | 1.3 | 9.5 |
| Front mounting bolt | 85 | 8.5 | 61.5 |
| Front mounting bracket bolt | 50 | 5.0 | 36.5 |
| Rear mounting bolt | 85 | 8.5 | 61.5 |
| Rear mounting bracket bolt | 50 | 5.0 | 36.5 |
| Front drive shaft flange bolt | 50 | 5.0 | 36.5 |
| Propeller shaft flange bolt | 50 | 5.0 | 36.5 |
| Rear mounting bracket No.2 bolt | 85 | 8.5 | 61.5 |
| Drive bevel gear bolt | 85 | 8.5 | 61.5 |
| Air inlet union | 13 | 1.3 | 9.5 |
| Side bearing cap bolt (provisional torque) | 15 | 1.5 | 11.0 |
| Actuator bracket bolt | 12 | 1.2 | 9.0 |
| Bearing cap bolt | 60 | 6.0 | 43.5 |
| Lock plate bolt | 13 | 1.3 | 9.5 |
| Differential carrier bolt | 23 | 2.3 | 17.0 |
NOTE:
The specified tightening torque is also described in the following. "FRONT DIFFERENTIAL COMPONENTS "
Reference:
For the tightening torque of fastener not specified in this article, refer to "FASTENER INFORMATION ".