Scan Tool Data Definition
ID code #1, #2, #3 and #4 (Tire pressure sensor ID code):
This parameter indicates each ID code of the tire pressure sensor registered in the TPMS control module.
Sensor #1, #2, #3 and #4 status (Learn, Low battery, OFF, Re-measure, Wake and/or Normal):
This parameter indicates the operational condition of the tire pressure sensor. For farther detail, refer to "TIRE PRESSURE MONITORING SYSTEM DESCRIPTION :" for transmitting condition of tire pressure sensor.
Air pressure #1, #2, #3 and #4 (kPa):
This parameter indicates the current air pressure in tire measured by tire pressure sensor. Maximum indicated value: 349.35 kPa Minimum indicated value: 0 kPa
#1, #2, #3 and #4 ID Regi status (ID Registration Status):
This parameter indicates whether or not TPMS control module has received the ID code of each tire pressure sensor after it was registered in TPMS control module. Complete: Indicates that TPMS control module has received the ID code of the tire pressure sensor. Incomplete: Indicates that TPMS control module has not received the ID code of the tire pressure sensor.
ID code Regi status (ID code Registration status):
This parameter indicates whether or not it has been registered in TPMS control module after performing the procedure to register the ID code of the tire pressure sensor in TPMS control module to check.
In progress: Indicates that registration of the ID code is being executed.
Complete: Indicates that the ID code of each tire pressure sensor has been registered in TPMS control module within a specified work time.
Time out: Indicates that the ID code of each tire pressure sensor has not been registered in TPMS control module within a specified work time.
Tire Pres Warn lamp (Low Tire Pressure Warning Light):
ON: TPMS control module detects low tire pressure in the tire or abnormality in system
OFF: Tire pressure monitoring system is in good condition
Vehicle Speed (km/h, MPH):
It is computed based on pulse signals from vehicle speed sensor on transfer or transmission.