Input Shaft Disassembly and Assembly

Input Shaft Disassembly and Assembly
Reference: Manual Transmission Assembly Dismounting and Remounting: H27 Engine Model
Reference: Manual Transmission Unit Disassembly: H27 Engine Model

Disassembly





Remove circlip of input shaft (1) and pull out bearing (2) with bearing puller (3) and hydraulic press.

CAUTION: Sealed bearing must not be washed. Replace it with new one when required.

Assembly
Reference: Input Shaft Inspection: H27 Engine Model





1) Bring bearing (1) so that its groove for C-ring is in the front of input shaft (2) and press-fit with special tools and hydraulic press.
Special Tool
(A):09940-51710
(B): 09924-07720
(C): 09924-07710





2) Select circlip (1) that will make thrust clearance of bearing 0.1 mm (0.0039 inch) or less and install it.





Circlip thickness specifications





3) Install roller bearing (1) to input shaft (2).