LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Verona S >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Air Bag System >> Repair Instructions >> Side Airbag Sensor Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Side Airbag Sensor Removal

WARNING: The sensing and diagnostic module (SDM) can maintain sufficient voltage to deploy the airbags and pretensioners for 1 minute after the ignition is OFF and the fuse has been removed. If the airbags and pretensioners are not disconnected, do not begin service until one minute has passed after disconnecting power to SDM. If the airbags are disconnected, service can be executed immediately without waiting for one-minute time period to expire. Failure to temporarily disable the SIR during service can result in unexpected deployment, personal injury and unnecessary SIR repairs.
  1. Disconnect the negative battery cable.
  2. Remove the trim from B pillar.
  3. Remove the side airbag sensor mounting bolts.
  4. Remove the side airbag sensor.
scientia non olet · About LEMON Manuals