Starter Motor Assembly

Install the drive and the pinion stop on the driveshaft.

Fig 1: Installing Drive And Pinion Stop On Driveshaft
Courtesy of SUZUKI OF AMERICA CORP.
Install the lock ring into the groove on the driveshaft and insert the collar.

Fig 2: Installing Lock Ring Into Groove On Driveshaft And Insert Collar
Courtesy of SUZUKI OF AMERICA CORP.
Install Shift Lever, Washer And Cushion.

Fig 3: Installing Shift Lever, Washer And Cushion
Courtesy of SUZUKI OF AMERICA CORP.
Lubricate the drive end of the armature shaft with lubricant.

Fig 4: Lubricating Drive End Of Armature Shaft With Lubricant
Courtesy of SUZUKI OF AMERICA CORP.
Position the solenoid assembly.

Fig 5: Positioning Solenoid Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Fasten the solenoid assembly with the screws.
Tighten

Tighten the starter solenoid assembly screws to 8 N.m (71 lb-in).
Install the field coil connection to the starter terminal. Install the nut.
Tighten

Tighten the starter field coil connector nut to 8 N.m (71 lb-in).

Fig 6: Installing Field Coil Connection To Starter Terminal
Courtesy of SUZUKI OF AMERICA CORP.
Position the armature assembly into the field frame.
Place the shield on the armature and field frame assembly.
Install the armature and field frame assembly with the shield into the starter housing.

Fig 7: Installing Armature And Field Frame Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Position the commutator end frame/brush holder assembly, lining up the end frame holes with the through-bolt holes in the housing.

Fig 8: Positioning Commutator End Frame/Brush Holder Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Install the starter through-bolts.
Install the starter. Refer to "STARTER INSTALLATION ".
Tighten

Tighten the starter through-bolts to 6 N.m (53 lb-in).

Fig 9: Installing Starter Through-Bolts
Courtesy of SUZUKI OF AMERICA CORP.