Center Member Installation

Install the center member with the bolts (center member-to-radiator bolt shown).
Tighten

Tighten the center member-to-crossmember bolt to 90 N.m (66 lb-ft).

Tighten the center member-to-radiator bolt to 90 N.m (66 lb-ft).

Fig 1: Installing Center Member With Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Install the rear engine mount through-bolt.
Tighten

Tighten the forward engine mount through-bolt to 80 N.m (59 lb-ft).
Install the forward engine mount through-bolt.
Tighten

Tighten the forward engine mount through-bolt to 80 N.m (59 lb-ft).
Install the power steering return line to its original position and install the bolts.
Install the engine under covers. Refer to "ENGINE UNDER COVERS INSTALLATION ".
Tighten

Tighten the power steering return pipe fixing bolts to 7 N.m (62 lb-in).

Fig 2: Installing Forward Engine Mount Through-Bolt
Courtesy of SUZUKI OF AMERICA CORP.