Changing the Fluid

Tools Required 

DW260-070 Plug Remover/Installer

1. Raise and suitably support the vehicle.
2. Place a fluid container below the fluid drain plug.
3. Remove the transaxle fluid drain plug using the plug remover/installer DW260-070.

   Tighten 

   Tighten the Plug to 45 N.m (33 lb-ft).

   Fig 1: Removing Transaxle Fluid Drain Plug

   Courtesy of SUZUKI OF AMERICA CORP.
4. Adding transaxle fluid. Refer to "FLUID LEVEL SET AFTER SERVICE "
5. Connect the negative battery cable.
   Fig 2: Changing Fluid

   Courtesy of SUZUKI OF AMERICA CORP.