Front Strut Assembly Disassembly

Tools Required 

KM-329-A Spring Compressor

1. Remove the strut assembly.
2. Fasten the strut assembly to the spring compressor KM-329-A. Make sure the hooks are seated on the strut spring properly.
   Fig 1: Removing Strut Assembly

   Courtesy of SUZUKI OF AMERICA CORP.
3. Compress the front spring with the spring compressor KM-329-A.
4. Remove the dust cover from the bearing assembly.
   Fig 2: Removing Dust Cover From Bearing Assembly

   Courtesy of SUZUKI OF AMERICA CORP.
5. Fix the strut mounting with bite and remove the piston rod nut.
   Fig 3: Removing Upper Strut Mount Bearing Upper Spring Seat Upper Spring Insulator

   Courtesy of SUZUKI OF AMERICA CORP.
6. Remove the upper strut mount, the mount bearing, the upper spring seat, the upper spring insulator, the hollow bumper, and the piston rod boot.
   CAUTION: Record the position of the front spring seat relative to the strut assembly-to-knuckle bracket. Place the front spring locator back in the same position during assembly.
   Fig 4: Removing Upper Strut Mount Bearing Upper Spring Seat

   Courtesy of SUZUKI OF AMERICA CORP.
7. Release the spring.
8. Remove the spring and the lower spring insulator.

Fig 5: Removing Spring And Lower Spring Insulator

Courtesy of SUZUKI OF AMERICA CORP.