LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Verona LX >> Repair and Diagnosis >> Steering >> Power Steering >> Power Assisted Steering System >> Repair Instructions >> Dust Boot Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Dust Boot Installation

  1. Install the dust boot.
  2. Install the tie rod end dust boot retaining clamp. Install the cylinder end dust boot retaining clamp with the installer KM-J-22610.
  3. Install the outer tie rod. Refer to "OUTER TIE ROD REMOVAL ".
  4. Install the wheel. Refer to "WHEEL INSTALLATION ".
  5. Lower the vehicle.
    Fig 1: Installing Dust Boot Retaining Clamps
    G04095714Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals