LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Verona LX >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater And Ventilation >> Repair Instructions >> Control Assembly Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Control Assembly Installation

  1. Connect the vacuum hose connection block to the mode control switch.
  2. Press the cable end eyelet onto the post on the controller.
  3. Attach the mechanical cable housing to its original control position.
  4. Connect the electrical connectors to the sockets on the back of the controller.
    Fig 1: Connecting Vacuum Hose Connection Block To Mode Control Switch
    G04095747Courtesy of SUZUKI OF AMERICA CORP.
  5. Gently insert the controller into position on the center console.
  6. Install the retaining screws.

    Tighten 

    Tighten the controller retaining screws to 4 N.m (35 lb-in).

  7. Connect the negative battery cable.
  8. Confirm the proper operation of the controller by moving it through all of the controller's possible functioning positions.
  9. Install the audio system trim plate. Refer to "INSTRUMENT CLUSTER TRIM PANEL INSTALLATION ".
    Fig 2: Inserting Controller Into Position On Center Console
    G04095748Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals