Resistration Procedure
NOTE:
If registration procedure takes longer than 5 minutes, repeat procedure from beginning.
- Connect the scan tool with ALDL connector.
- Turn the Ignition switch to ON.
- Go to the ID resister mode of the scan tool.
- Contact the LF tool on the air valve and push the tool's button for 4 seconds. A beep sound will be heard (2005), or the TPMS warning lamp will blink (2006). The sensor ID will be displayed on the scan tool screen.
- Repeat procedure for the remaining tires.
NOTE:
In case of tire replacement or rotation, the ID registration should always be performed for all 4 tires.