Tightening Torque Specifications
WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Application | N.m | lb-ft | lb-in. |
|---|---|---|---|
| Intake Manifold Retaining Bolt/Nut | 10 - 14 | - | 89 - 124 |
| Engine Beautification Cover Bolt | 8 - 12 | - | 71 - 106 |
| Front Support Bracket Bolt | 15 - 25 | 11 - 18 | - |
| Rear Support Bracket Bolt (Intake-side) | 8 - 12 | - | 71 - 106 |
| Rear Support Bracket Bolt (Exhaust-side) | 18 - 25 | 13 - 18 | - |
| Cylinder Head Cover Bolt | 12 - 14 | - | 106 - 124 |
| Air Filter Housing Bolt | 8 - 12 | - | 71 - 106 |
| Oil Filter Adapter Retaining Bolt | 20 - 26 | 15 - 19 | - |
| Connecting Piece | 17 - 23 | 13 - 17 | - |
| Oil Filter | 12 - 16 | 9 - 12 | - |
| Oil Pump Sprocket Retaining Nut | 18 - 22 | 13 - 16 | - |
| Oil Pump Bolt | 18 - 22 | 13 - 16 | - |
| Oil Suction Pipe-to-Oil Pump Retaining Bolt | 8 - 12 | - | 71 - 106 |
| Oil Suction Pipe Bracket Bolt | 8 - 12 | - | 71 - 106 |
| Oil Pump Sprocket Cover Bolt | 5 - 7 | - | 44 - 62 |
| Oil Pan Retaining Bolt | 8 - 12 | - | 71 - 106 |
| Oil Pan Flange-to-Transaxle Bolt | 27 - 35 | 20 - 26 | - |
| Oil Pan Drain Plug | 30 - 40 | 22 - 30 | - |
| Engine Mount Bracket-to-Hydro Mount Nut | 55 - 70 | 41 - 52 | - |
| Engine Mount Bracket Nut | 42 - 60 | 31 - 44 | - |
| Engine Mount Bracket Bolt | 42 - 60 | 31 - 44 | - |
| Transaxle Mount Cage-to-Longitudinal Member Bolt | 55 - 75 | 41 - 55 | - |
| Transaxle Mount Cage-to-Transaxle Mount Bracket Bolt | 55 - 75 | 41 - 55 | - |
| Transaxle Mount Cage-to-Transaxle Mount Bracket Nut | 55 - 75 | 41 - 55 | - |
| Transaxle Mount Cage Through Bolt | 100 - 120 | 74 - 89 | - |
| Exhaust Manifold Retaining Nut | 27 - 30 | 20 - 22 | - |
| Exhaust Manifold Heat Shield Bolt | 18 - 22 | 13 - 16 | - |
| Engine Block-to-Transaxle Bolt | 60 - 85 | 44 - 63 | - |
| Center Front Suspension Member Bolt | 80 - 100 | 59 - 74 | - |
| Transaxle Torque Converter Bolt | 40 - 50 | 30 - 37 | - |
| Front Engine Mount Bracket-to-Damper Bush Bolt | 70 - 90 | 52 - 66 | - |
| Engine Under Cover Retaining Bolt | 17 - 27 | 13 - 20 | - |
| Fixed Timing Chain Guide Bolt | 18 - 22 | 13 - 16 | - |
| Timing Chain Lever Bolt | 18 - 22 | 13 - 16 | - |
| Timing Chain Tensioner Bolt | 18 - 22 | 13 - 16 | - |
| Top Chain Guide Bolt | 9 - 11 | - | 80 - 97 |
| Timing Chain Cover Bolt | 6 - 10 | - | 53 - 89 |
| Timing Chain Cover Bolt (Center) | 18 - 22 | 13 - 16 | - |
| Drive Belt Automatic Tensioner | 20 - 30 | 15 - 22 | - |
| Water Pump Pulley Bolt | 8 - 12 | - | 71 - 106 |
| Engine Mount Bracket Support Bolt | 25 - 31 | 18 - 23 | - |
| Crankshaft Pulley Bolt | 500 - 600 | 369 - 443 | - |
| Flexible Plate Bolt | 70 - 80 | 52 - 59 | - |
| Cylinder Head Bolt | 20, 25 + 70° + 70° | 15, 18 + 70° + 70° | - |
| Upper Pad Bracket Bolt | 35 - 55 | 26 - 41 | - |
| Coolant Outlet Port Retaining Bolt | 8 - 12 | - | 71 - 106 |
| EGR Adapter Retaining Bolt | 18 - 22 | 13 - 16 | - |
| Power Steering Pump Retaining Bolt | 20 - 30 | 15 - 22 | - |
| Intake Manifold Support Bracket Bolt | 20 - 30 | 15 - 22 | - |
| Bed Plate Inner Bolt | 33+135° | 24+135° | - |
| Bed Plate Outer Bolt | 20 - 26 | 15 - 19 | - |
| Oil Pump Chain Lever Bolt | 6 - 10 | - | 53 - 89 |
| Engine Oil Dipstick Tube Bracket Bolt | 18 - 22 | 13 - 16 | - |
| Engine Oil Dipstick Tube Bolt | 8 - 10 | - | 71 - 89 |
| Bed Plate Baffle Bolt | 7 - 9 | - | 62 - 80 |
| Lower Pad Bracket Bolt | 35 - 45 | 26 - 33 | - |
| Idler Retaining Bolt | 35 - 55 | 26 - 41 | - |
| Upper Pad-to-Lower Pad Bracket Bolt | 30 - 40 | 22 - 30 | - |
| Compressor Retaining Bolt/Nut | 20 - 30 | 15 - 22 | - |
| Rocker Arm Shaft Plug | 35 - 45 | 26 - 33 | - |
| Camshaft Cap Bolt | 10 - 14 | - | 89 - 124 |
| Cam Sprocket Bolt | 18 - 22 | 13 - 16 | - |
| Connecting Rod Cap Bolt | 20 + 45° + 90° | 15 + 45° + 90° | - |
| Front Damper Bush Bracket Bolt | 55 - 75 | 26 - 55 | - |
| Rear Transaxle Mount Bracket Bolt | 55 - 75 | 26 - 55 | - |
| Target Wheel Bolt | 7 - 11 | - | 62 - 97 |
| Heater Adapter Bolt | 18 - 22 | 13 - 16 | - |
| Engine Block Ground Bolt | 15 - 25 | 11 - 18 | - |
| PCV Valve Bolt | 8 - 12 | - | 71 - 106 |
| Spark Plug | 20 - 30 | 15 - 22 | - |
| Wiring Harness Bracket Bolt | 8 - 12 | - | 71 - 106 |
| IAT (Intake Air Temperature) Sensor | 20 - 30 | 15 - 22 | - |
| MAP (Manifold Absolute Pressure) Sensor Bolt | 6 - 10 | - | 53 - 89 |
| ECTS (Engine Coolant Temperature Sensor) | 15 - 20 | 11 - 15 | - |
| CMP (Camshaft Position) Sensor | 10 - 14 | - | 89 - 124 |
| O2S (Oxygen Sensor) | 34 - 44 | 25 - 32 | - |
| CKP (Crankshaft Position) Sensor Bolt | 5 - 8 | - | 44 - 71 |
| Knock Sensor | 18 - 20 | 13 - 15 | - |
| Throttle Body Bolt | 8 - 18 | 6 - 13 | - |
| Ignition Coil Bolt | 6 - 8 | - | 53 - 71 |
| EGR Bolt | 20 - 30 | 15 - 22 | - |
| Water Pump Bolt | 20 - 26 | 15 - 19 | - |
| Thermostat Housing Bolt | 8 - 12 | - | 71 - 106 |
| Cooling Fan Assembly Bolt | 3.5 - 4.5 | - | 31 - 40 |
| Radiator Bracket Bolt | 10 - 8 | 7 - 13 | - |
| Coolant Reservoir Bolt | 3.5 - 4.5 | - | 31 - 40 |
| Front Exhaust Pipe Nut | 32 - 48 | 24 - 35 | - |
| Front Exhaust Pipe Lower Bracket Bolt | 32 - 48 | 24 - 35 | - |
| Front Exhaust Pipe-to-Front Muffler Nut | 25 - 35 | 18 - 26 | - |
| Front Muffler-to-Rear Muffler Nut | 32 - 48 | 24 - 35 | - |
| Catalytic Converter Heat Shield Nut | 2 - 3 | - | 18 - 27 |
| Front Muffler Heat Shield Nut | 2 - 3 | - | 18 - 27 |
| Rear Muffler Heat Shield Nut | 2 - 3 | - | 18 - 27 |
| Generator Upper Bolt | 30 - 40 | 22 - 30 | - |
| Generator Lower Bolt | 30 - 45 | 22 - 33 | - |
| Starter Motor Mount-to-Engine Block Bolt | 40 - 50 | 30 - 37 | - |
| Starter Motor Mount-to-Transaxle Bolt | 45 - 55 | 33 - 41 | - |
| Battery Rod Clamp Nut | 4 | - | 35 |
| Fuel Tank Shield Retaining Nuts | 2 - 3 | 1.5 - 2.2 | - |
| Evaporative Emission Canister Vapor Pipe Retaining Bolts | 7 - 12 | 5.2 - 8.9 | - |