Cruise Control Switch: Tap-Down

If the cruise control is already set and SET is selected for between 10 and 300 milliseconds, the target speed will decrease by 2 km/h for each time that SET was selected (or tapped). Tap-down signals will not be accepted for a target speed below 38.6 km/h (24 mph). If the vehicle speed has increased to 8 km/h (5 mph) over the target speed, the cruise control system will interpret a tap-down signal as a SET.

If the cruise control is turned off with the main switch, all cruise control functions are stopped, the actuator cable is driven toward idle, and the electromagnetic clutch for the cable actuator is opened. The cable actuator clutch is not opened immediately to accomplish a smooth transition in vehicle speed. If the cruise control is off for more than 5 seconds, the memorized target speed is erased.