April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: Transaxle Rear Mounting Bracket

GM1248179

Courtesy of GENERAL MOTORS CORP.

Install the shift linkage assembly.
Install the fixing shaft pin and connect the linkage connection part to the transaxle rear mounting bracket.

Fig 2: Clip, Bolt & Universal Joint

GM1248177

Courtesy of GENERAL MOTORS CORP.

Install the universal joint to the transaxle.
Install the clip and the bolt from the universal joint.
Install the rod clamp.
Adjust the shift linkage. Refer to Shift Linkage Adjustment .
Connect the negative battery cable.