LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Swift + >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions >> Gearshift Control Lever Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Wiring Harness Connectors & Shift Control Lever
    GM1245816Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
    NOTE: Refer to Transmission Selector Shaft Abuse Notice in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Remove the floor console. Refer to Console Replacement - Front Floor in Instrument Panel, Gages, and Console.
  3. Disconnect the wiring harness connectors from the shift control lever.
    4. Fig 2: Control Cable Adjusting Nut
    GM1245812Courtesy of GENERAL MOTORS CORP.
  4. Loosen the control cable adjusting nut.
  5. Disconnect the control cable from the shift control lever assembly.
    6. Fig 3: Removing Shift Control Lever Assembly & Mounting Bolts
    GM1245817Courtesy of GENERAL MOTORS CORP.
  6. Remove the shift control lever assembly mounting bolts.
  7. Remove the shift control lever assembly.
scientia non olet · About LEMON Manuals