LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Swift + >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System >> Repair Instructions >> Rear Axle Lower Control Arm Bushing Replacement >> Assembly Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Assembly Procedure

    Fig 1: J 29376-A & J 21474-01
    GM1242007Courtesy of GENERAL MOTORS CORP.
  1. Using J 29376-A  and J 21474-01  , perform the following procedures:
    1. Place the housing (4) on the rear axle.
    2. Slide the J 21474-19 (1) through the thrust washer (6).
    3. Slide the J 21474-19 through the J 29376-7 (5).
    4. Slide the J 21474-19 through the bushing.
    5. Slide the J 21474-19 through the J 29376-6-A bushing installer (3).
    6. Install the J 21474-18 (2).
    7. Hold the J 21474-19 and turn the J 21474-18 .
    2. Fig 2: Axis Of Rear Axle
    GM1242008Courtesy of GENERAL MOTORS CORP.
  2. Maintain a bushing angle of 45 degrees (a) to the axis of the rear axle.
  3. Install the rear axle. Refer to Rear Axle Replacement .
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals