Removal Procedure

Fig 1: Stabilizer Shaft-To-Knuckle Nut & Shaft-To-Link Nut

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Vehicle Lifting and Jacking Notice in Cautions and Notices.

Lift and suitably support the vehicle, allowing the front suspension to hang free.
Remove the front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
Remove the stabilizer shaft-to-knuckle nut and the shaft-to-link nut.

Fig 2: Installing Tie Rod Into Knuckle/Strut

Courtesy of GENERAL MOTORS CORP.

Disconnect the stabilizer shaft from the knuckle by removing the stabilizer shaft link assembly.