LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Swift + >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Repair Instructions >> Rack and Pinion Steering Gear Overhaul >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Valve, Pinion Assembly & Stub Shaft Housing
    GM1248358Courtesy of GENERAL MOTORS CORP.
  1. Remove the tie rod.
  2. Remove the rack bearing. Refer to Valve and Pinion Assembly Disassemble .
    3. Fig 2: Pinion Shaft Ball Bearing
    GM1248360Courtesy of GENERAL MOTORS CORP.
    NOTE: The pinion shaft ball bearing should be removed with caution by tapping the shaft gently.
  3. Remove the pinion shaft ball bearing.
    4. Fig 3: Sir Clip & Rack Gear Housing
    GM1248361Courtesy of GENERAL MOTORS CORP.
  4. Remove the sir clip from the rack gear housing.
    5. Fig 4: Rack Gear & Stopper
    GM1248362Courtesy of GENERAL MOTORS CORP.
  5. Remove the rack gear and stopper by pulling them.
  6. Remove the rack gear stopper.
scientia non olet · About LEMON Manuals