Enabling the SIR System
- Insert the air bag fuse F8 in the I/P fuse block.
- Turn the ignition switch to ON and verify that the air bag indicator flashes 7 times and turns OFF. If it does not operate as described, refer to Diagnostic System Check - SIR .
CAUTION:
Refer to SRS Caution
in Cautions and Notices.
CAUTION:
When enabling the SIR system, be extremely careful when installing the fuse and/or turning the ignition switch on. Stand clear of the inflator module and verify no loose objects are directly in front of the inflator modules. Possible personal injury or vehicle damage could result if an accidental deployment were to occur.