Installation Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Install the headlamp bulb.
- Install the retaining wire.
- Connect the headlamp bulb electrical connector.
- Install the cap concealing the headlamp bulb.
- Connect the electrical connectors.
- Install the headlamp assembly with the bolts.
Tighten: Tighten the headlamp assembly bolts to 6 N.m (53 lb in).
NOTE:
Refer to Fastener Notice
.