LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Use jacks in order to support the front suspension crossmember. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Stabilizer Bar & Crossmember Assembly
    GM1241979Courtesy of GENERAL MOTORS CORP.
  2. Lower the front suspension crossmember slightly in order to access the stabilizer shaft insulator brackets. Refer to Front Suspension Crossmember Replacement .
  3. Remove the bolts from the stabilizer shaft insulator brackets.
  4. Remove the brackets from the stabilizer shaft insulators.
  5. Remove the stabilizer shaft insulators.
  6. Clean the stabilizer shaft.
scientia non olet · About LEMON Manuals