Removal Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the electrical center cover.
- Locate the relay. Refer to Electrical Center Identification Views (Notchback) or Electrical Center Identification Views (Hatchback) to locate the electrical center where the relay exists.
- Always note the orientation of the relay.
- Ensure that the electrical center is secure, as not to put added stress on the wires or terminals.
- Using the J 43244 (1) position the tool on opposing corners of the relay (2).
- Remove the relay (2) from the electrical center.
IMPORTANT:
NOTE:
Use J43244 to pull the relay straight out from the electrical center terminals. The use of pliers or a flat bladed tool could damage the electrical center.