Removal Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Use paint in order to place match marks on the pump and on the rear shackle.
- Drain the power steering fluid by disconnecting the pressure and supply lines from the pump.
- Remove the rear shackle bolt.
- Remove the pump retaining bolt.
- Disconnect the pressure switch connector.
- Remove the front shackle bolt.
- Remove the pump assembly.