LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Drum Brake System) >> Repair Instructions >> Wheel Cylinder Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Wheel Cylinder, Backing Plate & Bolt
    GM1245738Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the wheel cylinder to the backing plate with the wheel cylinder bolt.

    Tighten:  Tighten the wheel cylinder-to-backing plate bolt to 8 N.m (71 lb in).

    2. Fig 2: View of Leading Shoe, Adjuster Assembly, Backing Plate, and Lower Return Spring
    GM1245734Courtesy of GENERAL MOTORS CORP.
  2. Connect the brake line to the wheel cylinder.

    Tighten:  Tighten the brake line to 16 N.m (12 lb ft).

  3. Install the shoe and lining, and the brake drum. Refer to Brake Shoe Replacement .
  4. Bleed the brakes. Refer to Hydraulic Brake System Bleeding (Manual) .
scientia non olet · About LEMON Manuals