Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Nut Securing Wiper Arm Linkage

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Battery Disconnect Caution .

Disconnect the negative battery cable.
Put the wiper arms in the upright position.
Remove the left side portion of the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
Remove the nut securing the wiper arm linkage to the motor drive shaft.

Fig 2: Wiper Arm Linkage At Motor

Courtesy of GENERAL MOTORS CORP.

Pry the wiper arm linkage off the motor drive shaft.
Disconnect the electrical connectors.
Remove the bolts and the wiper motor.