Installation Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connector.
- Install the rear wiper motor with the bolts.
Tighten: Tighten the wiper motor bolts to 9 N.m (80 lb in).
- Install the hatchback door lower garnish molding.
- Install the rear window wiper arm. Refer to Rear Window Wiper Arm Replacement .
- Connect the negative battery cable.
NOTE:
Refer to Fastener Notice
.