LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Swift + >> Repair and Diagnosis >> Electrical >> Starter >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> Diagnostic System Check - Engine Electrical >> Test Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Description

The numbers below refer to the step numbers on the diagnostic table.

  1. 2:  Lack of communication may be due to a malfunction of the serial data circuits. The specified procedure will determine the particular condition.
  2. 3:  The presence of DTCs may be related to an engine electrical condition. The specified procedure will compile all the available information before tests are performed.
Diagnostic System Check - Engine Electrical

Step Action Yes No
1 Perform the Battery Inspection/Test. Refer to Battery Inspection/Test .
Does the battery pass the test?		 Go to Step 2  -
2  Install a scan tool.
Does the scan tool power up?		 Go to Step 3  Go to Scan Tool Does Not Power Up in Data Link Communications
3 
  1. Turn ON the ignition, with the engine OFF.
  2. Attempt to establish communication with the engine control module (ECM).
Does the scan tool communicate with the ECM?		 Go to Step 4  Go to Scan Tool Does Not Communicate with Component in Data Link Communications
4 Select the Display DTCs function for the ECM.
Does the scan tool display DTC P0562 or P0563?		 Go to Diagnostic Trouble Code (DTC) List  in Engine Controls Go to Symptoms - Engine Electrical 
scientia non olet · About LEMON Manuals