LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Swift + >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brake System >> Repair Instructions >> Brake Pads Replacement - Front >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View of Caliper Assembly Retaining Frame
    GM1245692Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Brake Caliper Notice in Cautions and Notices.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. To maintain wheel balance, mark the relative positions of the wheel and the hub, and remove the front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
    3. IMPORTANT: It is not necessary to remove the caliper to service the brake shoes.
  3. Remove the lower bolt of the caliper assembly retaining frame.
    4. Fig 2: Removal of Brake Pads
    GM1245694Courtesy of GENERAL MOTORS CORP.
  4. Pull the caliper piston housing up.
    5. CAUTION: Refer to Brake Dust Caution in Cautions and Notices.
  5. Remove the brake pads.
scientia non olet · About LEMON Manuals