LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Swift + >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Wipers/Washer Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View of Electrical Connections and Wiper Switch
    GM1248384Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connections to the wiper switch.
    2. Fig 2: View of Wiper Switch and Switch Housing
    GM1248383Courtesy of GENERAL MOTORS CORP.
  2. Install the wiper switch by snapping it into the switch housing.
    3. Fig 3: View of Instrumental Panel Lower Cover
    GM1248378Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the lower steering column cover panel. Install the lower steering column cover panel screws.

    Tighten:  Tighten the lower steering column cover panel screws to 3 N.m (27 lb ft).

  4. Install the upper steering cover panel. Install the upper steering column cover panel screws.

    Tighten:  Tighten the upper steering column cover panel screws to 3 N.m (27 lb ft).

  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals