Installation Procedure
- Connect the audio system electrical connector and the antenna cable.
- Install the audio system with the screws.
Tighten: Tighten the audio system screws to 6 N.m (53 lb in).
- Install the instrument panel (I/P) lower trim panel. Refer to Instrument Panel (I/P) Trim Panel Replacement - Lower in Instrument Panel / Gauges and Console.
- Connect the negative battery cable.
- Enter the audio security system 4-digit code. Refer to Radio/Audio System Description and Operation .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.