Installation Procedure

Fig 1: View of Sunshade

Courtesy of GENERAL MOTORS CORP.

Fig 2: View of Sunroof Housing and Bolts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the sunroof housing.
Tighten: Tighten the sunroof housing bolts to 7 N.m (62 lb in).

Fig 3: View of Motor Control Module and Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Fig 4: View of Sunroof Module, Motor and Bolts

Courtesy of GENERAL MOTORS CORP.

Install the motor.
Tighten: Tighten the sunroof motor screws to 5 N.m (44 lb in).
Install the drain hoses.
Install the headliner. Refer to Headliner Replacement in Interior Trim.
Connect the negative battery cable.