LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Reno S, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Intake Air Temperature Sensor Removal and Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Intake Air Temperature Sensor Removal and Installation: Installation

  1. Install the IAT sensor into the air intake tube.
  2. Connect the IAT connector.
  3. Connect the negative battery cable.
    Fig 1: Installing IAT Sensor Into Air Intake Tube
    G04102615Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals