Generalized Testing

Set up the wateriest stands.

Fig 1: Identifying Wateriest Stand Components
Courtesy of SUZUKI OF AMERICA CORP.
Set up the wateriest stand leak test.

Fig 2: Performing Watertest Stand Leak Test
Courtesy of SUZUKI OF AMERICA CORP.
Perform the wateriest stand leak test. Refer to "WATERIEST STAND SPECIFICATIONS :".
If the local water pressure does not allow the required water pressure of 155 kPa (22.5 psi), move both stands closer to the vehicle so that the water spray overlaps.

Fig 3: Identifying Water Spray Angle
Courtesy of SUZUKI OF AMERICA CORP.