LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Reno LX, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Manifold Absolute Pressure Sensor Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Manifold Absolute Pressure Sensor Removal and Installation: Installation

  1. Connect the MAP sensor connector to the MAP sensor.
  2. Install the MAP sensor into the intake manifold.
  3. Install the MAP sensor retaining bolt.

    Tighten 

    Tighten the MAP sensor retaining bolt to 4 N.m (35 lb-in).

  4. Connect the fuel rail. Refer to "FUEL RAIL AND INJECTORS REMOVAL AND INSTALLATION :".
  5. Connect the negative battery cable.
    Fig 1: Installing MAP Sensor Retaining Bolt
    G04102619Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals