Conditions for Setting the DTC
- Altitude compensated MAP reading is higher than high threshold or lower than low threshold table based on RPM and TP signal.
- DTCs P0107, P0108, P0115, P0117, P0118, P0122, P0123, P0125, P0201, P0202, P0203, P0204, P0300, P0351, P0352, P0401, P0402, P0404, P0405, P0406, P0443, P0488, P0496, P0506, or P0507 are not set.
- Engine running.
- Valid Barometric Pressure (BARO) update.
- Torque Converter Clutch (TCC) steady (A/T).
- A/C steady state.
- No TP sensor fail conditions present.
- No MAP fail conditions present.
- Change in Idle Air Control (IAC) is less than 5%.
- Coolant temperature is greater than -10°C (14°F).
- Change in RPM is less than 200.
- Change in TP sensor is less than 3% or change in MAP is less than 5 kPa.
- Change in Exhaust Gas Recirculation (EGR) value is less than 6%.
- The RPM is between 1300 and 4500.
- All of the above are stabilized for 1.5 seconds.