Speedometer Gear, M/T: Service and Repair

Speedometer Driven Gear Removal and Installation
Removal





1. Disconnect the speedometer speed sensor electrical connector.
2. Remove the speedometer housing retaining bolt.





3. Remove the speedometer-driven gear and the speedometer housing.

Installation
1. Coat the O-ring with petroleum jelly.
2. Install the speedometer-driven gear and the speedometer housing.





3. Install the speedometer housing retaining bolt.
^ Tighten the speedometer housing retaining bolt to 4 Nm (35 inch lbs.).





4. Connect the speedometer speed sensor electrical connector.