Shift Interlock: Service and Repair

Shift Control Lever Assembly Removal and Installation
Removal
1. Disconnect the negative battery cable.
2. Remove the floor console.
3. Disconnect the electrical switch connectors.





4. Remove the shift control cable adjuster pinch nut.
5. Remove the cable from the bracket.





6. Remove the bolts and nuts holding the shift control assembly to the floor panel.
7. Remove the shift control assembly.





Installation
1. Install the shift control assembly.
Tighten:
Tighten the shift control assembly mounting bolts and nuts to 8 Nm (71 inch lbs.).





2. Install the shift control cable onto the bracket.
3. Install the shift control cable adjuster pinch nut.
Tighten:
Tighten the shift control cable adjuster pinch nut to 8 Nm (71 inch lbs.).





4. Connect the electrical switch connectors.
5. Install the floor console.
6. Connect the negative battery cable.