Hub and Bearing Removal and Installation: Removal: Notes

Remove the drive axle from the front wheel hub. Refer to "KNUCKLE ASSEMBLY REMOVAL AND INSTALLATION :".
Remove the inner snap ring.

Fig 1: Removing Inner Snap Ring
Courtesy of SUZUKI OF AMERICA CORP.
Remove the wheel hub with the support bridge J-37105-B-1, the hub adapter J-377105-B-3, the hex nut 500-20, and the forcing screw J-36661-2.

Fig 2: Removing Wheel Hub
Courtesy of SUZUKI OF AMERICA CORP.
Remove the brake shield. Refer to "SPLASH SHIELD REMOVAL AND INSTALLATION :".
Remove the outer snap ring.

Fig 3: Removing Outer Snap Ring
Courtesy of SUZUKI OF AMERICA CORP.
Remove the wheel bearing with the support bridge J-37105-B-1, the bearing adapter J-37105-B-2, the hex nut 500-20, and the forcing screw J-36661-2.
Clean the bore of the knuckle.

Fig 4: Removing Wheel Bearing
Courtesy of SUZUKI OF AMERICA CORP.