LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Reno EX >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System >> Repair Instructions >> Condenser Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Condenser Removal and Installation: Removal

  1. Disconnect the negative battery cable.
  2. Discharge and recover the refrigerant. Refer to "DISCHARGING, ADDING OIL, EVACUATING, AND CHARGING PROCEDURES FOR A/C SYSTEM :".
  3. Remove the front bumper. Refer to "FRONT BUMPER FASCIA REMOVAL AND INSTALLATION :".
  4. Remove the discharge hose block-to-condenser retaining nut.
  5. Remove the discharge hose from the condenser.
  6. Remove the liquid pipe block-to-receiver-dryer retaining nut.
  7. Remove the liquid pipe from the receiver-dryer.
    Fig 1: Removing Retaining Nut And Liquid Pipe Block-To-Receiver-Dryer
    G04104137Courtesy of SUZUKI OF AMERICA CORP.
  8. Remove the condenser mount bolts.
  9. Remove the condenser.
  10. Cap all the open lines and the fittings to prevent contamination.
    Fig 2: Removing Bolts And Condenser
    G04104138Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals