LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Reno EX >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System >> Repair Instructions >> A/C Pressure Transducer Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C Pressure Transducer Removal and Installation: Installation

  1. Install the new O-ring seal on the transducer.
  2. Install the pressure transducer.

    Tighten 

    Tighten the pressure transducer to 7 N.m (62 lb-in).

  3. Connect the wire connector.
  4. Connect the negative battery cable.
  5. Recover the refrigerant. Refer to "DISCHARGING, ADDING OIL, EVACUATING, AND CHARGING PROCEDURES FOR A/C SYSTEM :".
    Fig 1: Installing O-Ring Seal On Transducer
    G04104101Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals