Gearshift Lever Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the negative battery cable.
Position the gearshift lever into NEUTRAL.
Disconnect the boot from the console cover.
Lift the console cover upward to expose the shift control lever mechanism.

Fig 1: Disconnecting Boot From Console Cover
Courtesy of SUZUKI OF AMERICA CORP.
Rotate the gearshift lever stop clamp and remove it.
Remove the gearshift lever from the gearshift lever shaft.

Fig 2: Removing Gearshift Lever Stop Clamp
Courtesy of SUZUKI OF AMERICA CORP.