Steering Wheel Removal and Installation: Removal

Disconnect the negative battery cable.
Remove the SIR module. Refer to "DRIVER AIRBAG MODULE REMOVAL AND INSTALLATION :".
Remove the steering wheel nut and the retaining clip.

Fig 1: Removing Steering Wheel Nut And Retaining Clip
Courtesy of SUZUKI OF AMERICA CORP.

NOTE: In order to install the steering wheel correctly, match-mark the steering column shaft to the steering wheel.
Remove the steering wheel using the steering wheel puller KM-210-A.
Unclip the contact ring from the steering wheel, if necessary.

Fig 2: Removing Steering Wheel Using Steering Wheel Puller
Courtesy of SUZUKI OF AMERICA CORP.