Steering Wheel Removal and Installation: Installation
- Clip the contact ring on the steering wheel, if necessary.NOTE: In order to correctly install the steering wheel, match-mark the steering column shaft to the steering wheel.
- Align the match marks on the steering wheel and the steering column shaft. Turn the signal canceling cam on the wheel to the left.
- Install the retaining clip and the steering wheel nut.
Tighten
Tighten the steering wheel nut to 38 N.m (28 lb-ft).
- Bend the tabs to secure the retaining clip.
- Install the SIR Module. Refer to "DRIVER AIRBAG MODULE REMOVAL AND INSTALLATION :".
- Connect the negative battery cable.