Cruise Control Actuator Assembly (with Control Module) Power and Ground Circuits Check

CRUISE CONTROL ACTUATOR ASSEMBLY (WITH CONTROL MODULE) POWER AND GROUND CIRCUITS - DIAGNOSTIC CHART

Step	Action	Yes	No
1	Power and ground circuits check Disconnect connector from cruise control actuator assembly (with control module) with ignition switch OFF. Check for proper connection to cruise control actuator assembly (with control module) at terminals "E132-12" and "E132-11". If OK, turn ignition switch ON. Check voltage between terminals "E132-12" and "E132-11". Does voltmeter indicate 10- 14 V?	Power and ground circuits are OK.	"BLU/BLK" or "BLK" circuit is open.